Comsocks version 3.02/3.03a


This version has been tested under Windows 95, 95 OSR2.1, 98 first and second edition, NT 4.0 workstation and server, SP 4, SP5 by using a dial-up networking and an ADSL connection through TeleSystems PPPoE adapter. However, the NAT function does not work with Token Ring cards. If this is the case, you can use a traditional proxy, which is available in all versions. Do not install this version in Windows 2000 and Windows Millennium. Click here to download v3.05/v3.05a.

The NAT feature is available in both Standard and Plus version. A zero-configuration in any client computer is possible if you also use a DHCP server* (No IP assignment, no DNS and default Gateway). No need to setup your browser, email software, newsgroup reader, etc.... In the gateway, do the following:

  1. Assign an IP and netmask (but no default gateway) to the local network card in Windows network properties
  2. Enable NAT in the proxy server
  3. If you want DHCP, configure and enable DHCP under the Daemon tab in the proxy server*
If you are using DHCP, do not specify IP, DNS and Default Gateway* in any client computer, otherwise, you need to do so.

If you have a previous version of Comsocks and you got the licence in 1999, Do not install this version. Your key won't work. You will need to do an upgrade. Please uninstall your previous version before you install the new one (you need to reboot your system after you uninstall the previous version).

Description Download File Build
Number		 Update Date
ComSocks Plus (v3.03a)* csk303a_.exe ( 1.6M bytes) from site1 1 08/02/00 01:02:04 PM
ComSocks Plus (v3.03a) csk303a_.exe ( 1.6M bytes) from site2 1 08/02/00 01:02:04 PM
ComSocks Plus (v3.02a)* csk302a_.exe ( 1.5M bytes) from site1 1 07/10/00 10:37:27 AM
ComSocks Plus (v3.02a) csk302a_.exe ( 1.5M bytes) from site2 1 07/10/00 10:37:27 AM
ComSocks Standard (v3.02) csk302_.exe ( 1.5M bytes) from site1 1 07/10/00 11:15:13 AM
ComSocks Standard (v3.02) csk302_.exe ( 1.5M bytes) from site2 1 07/10/00 11:15:13 AM


Please right click the above link then select SAVE TARGET AS to save the file.

*Only the Plus version has a built-in DHCP server. V3.03a has VPN (PPTP) support. For the configuration in the Standard version , please refer to the on-line help.

ALERT

MISSING CHILD
Please check this photo, you may have the clue needed to find this child.