Quake I or II Configuration

You need to add a port mapping in order to play Quake.

click Port Mapping Tab in ComSocks
click Add button
please set up a port mapping as follows:

Port Mapping’s Name	:	Quake Port Mapping 1
Proxy IP Address: Port	:	gateway_ip : 27910
Destination Name or IP	:	Quake server name or IP, i.g. 24.100.102.100
Destination Port	:	27910
Messages come from sender’s Port	:	0
Proxy server uses this Port to send messages	:	0
Transport	:	udp
Rule	:	general
Bi-directional UDP mapping	:	[check]

if you have additional remote Quake servers to connect, you will set up an additional port mapping for each of them. Enter Quake server name or IP into Destination Name with the same Destination Port 27910, but the Proxy IP : Port pair is different, such as gateway_ip: 27911, gateway_ip: 27912, … etc.
click OK to close the dialog box
select the port mapping and enable the service
click OK or Apply
in your client computer’s game screens, enter:

connect gateway_ip:27910

connect gateway_ip:27911 (for additional Quake server)

connect gateway_ip:27912 (for additional Quake server)

…