Half-Life
Note: This configuration is designed to work with version 3.01 of ComSocks using NAT. If you are using an
earlier version, please download and install version 3.01.
- Open the ComSocks manager and click on the Port Mapping tab. Then, click the
Add button to configure the port mapping
- Enter a name for this port mapping, such as Half-Life TCP In
- From the Proxy IP Address selection menu, please select 0.0.0.0(Any IP)
- Enter the Proxy Port 27015, and click Add
- Enter the IP of the client computer that will be connecting to the Half-Life server into the
Destination Name or IP. In this example it is 192.168.0.2, though this may not be the case for your
network.
- Enter 27015 into the Destination Port
- Select TCP from the Transport selection menu
- Click Ok
- Click on the General tab
- Remove the check from Use this proxy IP for all daemons and port mapping
- Click Apply
